幸运飞艇

Customized high speed dispensing machine, glue machine!

深圳市中制自动化设备有限公司  

ShenZhen CNAUTO Automation Co., LTD.

13928403389

20

2019-04

writer:点胶机厂家 Click:139

This brief introduction on how to adjust the needle of dispensing machine will involve the difference of needle type and specifications. There may be many repetitive effects of dispensing glue in different industries. Only by establishing the way and oper.

19

2019-04

writer:点胶机厂家 Click:126

The concept of seamless underwear has appeared for a long time. From the present point of view, the demand of seamless underwear lies in the two points of health and comfort. Rational use of dispensing technology is an important operation process. It shou.

16

2019-04

writer:点胶机厂家 Click:67

The main function of sealing glue for small electronic products is sealing protection, and at the same time, it greatly improves the function of protecting dust and moisture. The main purpose is to use sealing glue for small products such as battery cover.

16

2019-04

writer:点胶机厂家 Click:150

Adhesive sealant should be applied in battery cover coating or semiconductor coating. Of course, in order to ensure the quality of adhesives, operators need to know the difference and selection between sealant and glass glue. The particularities of the tw.

13

2019-04

writer:点胶机厂家 Click:164

Electronics chip coating method of semiconductor material has gradually changed from manual to automatic equipment. It is recommended that visual dispensing machine be used in semiconductor coating with high degree of completion and good quality. So CCD v.

12

2019-04

writer:点胶机厂家 Click:140

Small-sized batteries cover coating can be accomplished by desktop dispensing machine. In fact, the application effect of visual dispensing machine in batch production has more superior effect. CCD visual dispensing machine can be used in batch production.

11

2019-04

writer:点胶机厂家 Click:174

High or low viscosity adhesives are often used in product dispensing. According to the need of bonding strength, they tend to be the former. This paper briefly describes the adjustment and mode of controlling the viscosity of glue in industry production. .

11

2019-04

writer:点胶机厂家 Click:153

There is a requirement for consistency in the gluing process of bottle cap in batch production line type. Some special bottle cap gluing uses white latex instead of hot melt glue which is only used for building gluing. Therefore, it is better to control t.

09

2019-04

writer:点胶机厂家 Click:127

White latex is made from emulsion polymerization of water dispersive medium. It can be coated with white latex, such as carton bonding, sticky board, wood furniture and furniture assembly. When used, it includes viscosity control method, the need to use s.

08

2019-04

writer:点胶机厂家 Click:113

Operators can apply white latex on the links of wood-bonded boards to reinforce the strength further. Manual work can be done by hand or by special automatic white latex dispenser. The white latex can be coated on the surface of wood-bonded boards by oper.

04

2019-04

writer:点胶机厂家 Click:103

Whether controlling special glue or controlling adhesives such as high temperature and low temperature resistant glue, the fluidity and applicability should be guaranteed. The speed of glue stored in piston dispensing syringe has a great influence on effi.

02

2019-04

writer:点胶机厂家 Click:77

The screen sealing of phone can be carried out with special type sealant, of course, epoxy glue can also be applied to finish the sealing work. Because the sealing accuracy and stability control of phone screen after gluing need to ensure hi.

31

2019-03

writer:点胶机厂家 Click:159

Ordinary screen seals of phones protect against impact and waterproof by manual operation. In fact, they can be quantitatively controlled by automation equipment with higher efficiency and quality. A large number of phone screens need to be .

25

2019-03

writer:点胶机厂家 Click:191

4331 dispensing machine is one of the duplex equipment, which can be used for precision dispensing, gluing and packaging of batch products. It has the unique advantages of high efficiency, stability and strong. After programming with the control board, it.

23

2019-03

writer:点胶机厂家 Click:53

Glue is the medium used for bonding products. The control method of glue strength is usually through temperature adjustment. Pressure barrel with heating device is also suitable for storage and glue control. It is partly affected by the nature of glue pro.

22

2019-03

writer:点胶机厂家 Click:183

Capacitor cover bonding should be glued with glue for encapsulation. The characteristics of double position of 4331 dispenser are suitable for strengthening capacitor cover by gluing. This equipment can be used for batch precision gluing. The stability of.

19

2019-03

writer:点胶机厂家 Click:84

331 dispensing machine has become an important equipment in modern automation production line. It can assemble many control parts including 2121 dispensing valves to complete dispensing, packaging and dispensing of various products. One of the problems in.

16

2019-03

writer:点胶机厂家 Click:136

Manual gluing mode is mainly applicable to the production of products with small demand. Operators can use manual gluing by connecting the controller of 2121 point valves with air source of air compressor. Compared with the automatic mode of 331 point dis.



中制自动化设备有限公司全力为用户打造各种实用性强的高速全自动点胶机 大型高速点胶机 落地式高速点胶机

友情链接:博发彩票官网  博发彩票官网  长江彩票网  长江彩票  百分百彩票官网  千禧彩票  百分百彩票  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!